Kaysun KAE-26 DN7, Техническое руководство

Страница: 43 / 64

PRODIGY Technical Manual
43
When the AC enters into the information enquiry status, it will display the code value in the next 25s,
the details are as follows.
Enquiry information Display
value
Meaning Remark
T1,T2,T3,T4,
T2B,TP,TH,
Targeted
Frequency,
Actual Frequency
-1F,-1E,-1d,-
1c,-1b,-1A
-25,-24,-23,-22,-21,-20 1. All the displaying temperature is actual value.
2. All the temperature is °C no matter what kind of remote
controller is used.
3. T1,T2,T3,T4,T2B display range:-25~70,
TP display range:-20~130.
4. Frequency display range: 0~159HZ.
5. If the actual value exceeds the range, it will display the
maximum value or minimum value.
-19
—99
-19
—99
A0,A1,…A9 100,101,…109
b0,b1,…b9 110,111,…119
c0,c1,…c9 120,121,…129
d0,d1,…d9 130,131,…139
E0,E1,…E9 140,141,…149
F0,F1,…F9 150,151,…159
Indoor fan speed
/Outdoor fan speed
0 OFF
1,2,3,4 Low speed, Medium
speed, High speed,
Turbo
For some big capacity motors.
14-FF Actual fan
speed=Display value
turns to decimal value
and then multiply 10.
The unit is RPM.
For some small capacity motors,
display value is from 14-FF(hexadecimal), the
corresponding fan speed range is from 200-2550RPM.
EXV opening angle 0-FF Actual EXV opening
value=Display value
turns to decimal value
and then multiply 2.
Compressor
continuous running
time
0-FF 0-255 minutes If the actual value exceeds the
range, it will display the maximum
value or minimum value.
Causes of
compressor stop.
0-99 For the detailed
meaning, please
consult with engineer
Decimal display
Reserve 0-FF
Reserve 2~28
Reserve 5~20
Reserve 5~25
8.5 Multi-function board instruction (This multi-function board is optional)
8.5.1. Function
The multi-function board receives the signal of 4-cored wired controller(central controller),Non-polar
wired controller and CP remote on-off signal( ON-OFF command signal) . Then converting it to the
communication signal to the main control board.
The multi-function board can output Alarm signal.