Kaysun COMPAK KHP 15/190 ACS1 Скачать руководство пользователя страница 36

Страница: 36 / 52

TSM 2017-09 ………….. Kaysun combo type KHP 15/190 ACS1 Manual

Vacation mode

The icon will be lightened if the unit is under vacation mode, otherwise the icon will be extinguished.

When setting vacation mode, the icon will flash with 2Hz frequency.

Compressor

The icon will be lightened when compressor is running, otherwise it will be extinguished.

E-heater

The icon will be lightened if E-heater is activated, otherwise, it will be extinguished. If E-heater is

automatically activated by unit, the icon will be lightened. If E-heater is manually activated, it will flash

with 0.5Hz frequency. When setting E-heater manually ON/OFF, it will flash with 2Hz frequency.

Disinfect

The icon will be lightened when the unit is under disinfecting mode, otherwise it will be extinguished.

The icon will be lightened if disinfect mode is automatically activated by unit. The icon will flash with

0.5Hz frequency, if disinfect mode is manually activated. It will flash with 2Hz frequency when setting

this mode or setting disinfect timer.

High temperature Alarm

If setting water temperature is higher than 50°C, the icon will be lightened, otherwise it will be

extinguished.

Alarm

When unit is under protection /error, the icon will flash with 5Hz frequency as well as buzzer will

sound 3 times per minute until protection/error eliminated or press ‘

CANCEL

’ for 1 second.

Lock

If button is locked, the icon will be lightened, otherwise it will be extinguished.

10.

Temperature unit

If setting temperature unit as Celsius, ‘

°C

’ will be lightened, ‘

’ will show Celsius degree. If setting

temperature unit as Fahrenheit, ‘

ºF

’ will be lightened, ‘

’ will show Fahrenheit degree.

Содержание COMPAK KHP 15/190 ACS1





















































Результаты поиска

Содержание COMPAK KHP 15/190 ACS1

Отзывы:

Бренды по названию

Популярные бренды

Kaysun COMPAK KHP 15/190 ACS1, Техническое руководство

Результаты поиска

Содержание COMPAK KHP 15/190 ACS1

Отзывы:

Бренды по названию

Популярные бренды