Instruction manual for care bed „Ida 1.0“
25
Connect electric components
49
47
48
48
Position Function
47 hand switch
48 height adjustment
49 power supply cable
50 emergency release of head section
Connect the cables to the adjustment mechanism as shown in the
figure. The adjustment mechanism is located on the bottom of the
insert frame.
1. Plug the power supply cable into a socket.
2. Unlock all control keys on the hand switch using the blue key
(see chapter “Unlocking/locking control keys”).
3. The care bed is now ready for operating.
» Check all functions of the hand switch (see chapter “Setup and
functions”):
4. If a problem occurs stop using the care bed. Please contact the
manufacturer (see chapter “Manufacturer”).
main plug
LED light (pos. ) lights up green:
mains plug ready
LED light (pos. ) not lit:
Error - please contact the manufacturer (see chapter “Manufacturer”)
LED-Leuchte
