EN
8
OPERATION
Sitting position
It is very important that the bike is correctly adjusted, from the point of view of both comfort and
safety� There is information on the following pages on how to adjust your sitting position to make it
comfortable, safe and effective�
Saddle adjustment
Loosen the nut that holds the saddle to the saddle pillar so that you can push the saddle backwards
or forwards�
Adjust it to the desired position� The saddle angle can also be adjusted� We recommend that the
saddle is positioned horizontally�
Adjust the saddle height by loosening the clamp bolt holding the saddle pillar to the seat tube�
Position
the saddle pillar at the desired height and tighten the clamp bolt�
IMPORTANT!
• The saddle pillar must be lower than the maximum height indicator� The maximum height
indicator must not be visible�
• Tighten the saddle pillar’s clamp bolt and nut to 30 Nm using a 6 mm Allen key or a 13 mm hex
key� Check that the saddle pillar is securely attached by attempting to twist the saddle by hand�
You must not be able to twist the saddle�
• Never cycle if the bike or saddle pillar is not properly tightened�
Different saddle pillars are used for different types of saddle, which is why the attachments vary�
Contact the retailer if you are unsure of how the saddle should be assembled�
Saddle angle
The saddle should preferably be horizontal� You can change the saddle angle, but the saddle should
usually be horizontal� If you sit best with the saddle at a great angle, you should check if you can
change any other setting instead�
