Kaya Instruments IRON CoaXPress, Руководство пользователя

Страница: 17 / 43

2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
www.kayainstruments.com Page no. 14 | Configuration Interface
6.3 Acquisition Control
The Acquisition stream control section describes settings and state for data generation (commands and stream).
Acquisition can also be controlled trough executing the relevant commands from this category
Figure 5 – Acquisition Control category in GenICam Browser
6.3.1 Acquisition Control XML parameters
Parameter Description Gen<i>Cam name Type Possible values Remarks
Value Gen<i>Cam name
Gen<i>Cam Category: AcquisitionControl
Acquisition
Reset Resets the image acquisition
logic and counters AcquisitionReset Command 1 - Activate
Acquisition Start Starts the Acquisition of the
device
AcquisitionStart Command 1 - Activate
Acquisition Stop Stops the Acquisition of the
device at the end of the
current Frame
AcquisitionStop Command 0 - Activate
Frame Rate Max Acquisition rate maximum
value
AcquisitionFrameRateMax Float In units of Hz
Frame Rate Controls the acquisition rate at
which the frames are captured AcquisitionFrameRate Float ≥ 1 In units of Hz
Exposure Mode Sets the operation mode of
the Exposure
(or shutter)
ExposureMode Enumeration 0x00 Timed
0x01 TriggerWidth
Exposure Time
Max Exposure time maximum value ExposureTimeMax Float In units of
microseconds (us)
Exposure Time Sets the Exposure time when
ExposureMode is Timed
ExposureTime Float ≥ 1.0 In units of
microseconds (us)
See remark (1)
Trigger Selector Selects the type of trigger to
configure
TriggerSelector Enumeration 0 FrameStart
Trigger Mode Controls if the selected trigger
is active TriggerSoftware Enumeration 0x00 Off
0x01 On
Table 6 – Acquisition Control parameters