Kaya Instruments IRON CoaXPress, Руководство пользователя

Страница: 23 / 43

2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
www.kayainstruments.com Page no. 20 | Configuration Interface
By default, the ROI is defined to be maximum possible area, i.e. the horizontal and vertical offsets are 0 and the
ROI width and height as the sensor dimensions. The ROI settings for brightness calculations could be modified
under section Analog Control->AutoCompensationControl:
Figure 14 – ROI parameters
Auto Exposure ROI parameters are described in the following table:
Parameter Description Gen<i>Cam name Type Possible values Remarks
Value Gen<i>Cam name
Gen<i>Cam Category: AnalogControl/AutoCompensationControl
Auto
Compensation
ROI Width Width of the
Auto Compensation
calculation ROI AutoCompensationRoiWidth Integer
Auto
Compensation
ROI Height Height of the
Auto Compensation
calculation ROI AutoCompensationRoiHeight Integer
Auto
Compensation
ROI Offset X OffsetX of the
Auto Compensation
calculation ROI AutoCompensationRoiOffsetX Integer
Auto
Compensation
ROI Offset Y OffsetY of the
Auto Compensation
calculation ROI AutoCompensationRoiOffsetY Integer
Table 10 – Auto compensation ROI control