Kawai K-15E ATII, Руководство пользователя

Страница: 3 / 120

- 3 -
Failure to do so may cause breakdown of this
product and other devices.
●
Doing so may cause the product to generate
noise.
●
If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then contact
the shop from which the product was purchased.
●
Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or
injury.
●
Doing so may result in discoloration or deformation
of the product.
●
When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.
Doing so may cause the product to fall over,
resulting in injury.
Entry of water, needles or hair pins may result
in breakdown or short-circuit.
Do not wipe the product with benzene
or thinner.
Do not stand on the product or exert
excessive force.
When connecting the AC power cord
and other cords, take care
not to get them tangled.
Do not place the product near electrical
appliances such as TVs and
radios.
Do not lean against the keyboard.
Take care not to allow any foreign
matter to enter the product.
Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.
CAUTION
OFF
Using the product in such areas may result in
product breakdown.
Closing it roughly may trap your fingers, resulting
in injury.
Do not use the product in the following areas.
●
Areas, such as those near windows, where the product is
exposed to direct sunlight
●
Extremely hot areas, such as near a heater
●
Extremely cold areas, such as outside
●
Extremely humid areas
●
Areas where a large amount of sand or dust is present
●
Areas where the product is exposed to excessive
vibrations
When you close the fallboard,
close it gently.
This product may be equipped with a polarized line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so
that it can readily be disconnected in an emergency because electricity is always charging while the plug
is in the AC outlet even in a power switch off conditiion.
English