Instructions for use SMARTmatic S10 REF 1.011.6730 SMARTmatic S10 K REF 1.011.6731 SMARTmatic S10 S REF
1.011.6732
7 Processing steps in accordance with ISO 17664 | 7.6 Care products and systems - Servicing
See also:
2
Instructions for use KaVo QUATTROcare 2104 / 2104A
▶ Remove the bur, place the spray nozzle in the opening and spray.
▶ Subsequently treat with the specified care products and systems.
See also:
2
Servicing with KaVo QUATTROcare
7.6.3 Servicing with KaVo QUATTROcare PLUS
Servicing and cleaning device with expansion pressure for internal cleaning of inor-
ganic residues and optimum servicing.
(no validated internal cleaning in accordance with German RKI requirements)
KaVo recommends servicing the product as part of the processing after each use, i.e.
after each cleaning, disinfection, and before each sterilization.
▶ Remove the bur.
▶ Service the product in the QUATTROcare PLUS.
See also:
2
Instructions for use KaVo QUATTROcare PLUS
Servicing the chuck
KaVo recommends cleaning and servicing the chuck system once a week using the
chuck servicing program integrated in the device.
See also:
2
Instructions for use KaVo QUATTROcare PLUS
Note
Handpieces must be taken off the service couplings before the chuck service can
be started and run.
▶ Close the front door and press the chuck service button for at least three seconds
until the spray canister control LED flashes three times consecutively.
ð
The device is in chuck service mode.
▶ Remove the service coupling chuck from the side hatch of the QUATTROcare
PLUS and attach it to coupling service station four, on the far right. A MULTIflex
adaptor must be mounted there.
▶ Press the handpiece together with the guide bush of the chuck to be serviced
against the tip of the service coupling.
▶ Press the button marked with the chuck service symbol.
23 / 30
