KaVo GENTLEpower LUX Contra-angle 25 LP, Инструкции техника

Страница: 6 / 20

Technician's instructions GENTLEpower LUX Contra-angle 25 LP - REF 1.001.2849
2 Disassembly | 2.1 Disassembly of the GENTLEpower LUX Angle Piece 25 LP
6 / 20
▶ Pull the head casing ① and the adapter ⑪ forward and out and remove the two
balls ⑨.
▶ Use the circlip pliers to twist the adapter ⑪ slightly and remove it from the head
casing ①, then remove the two springs ⑩.
▶ Slide the spray insert ③ out of the head casing ①.
▶ Remove the drive axle ⑤ and spring washer ④ from the spray insert ③.
▶ Remove two O-rings ②.
2.1.2 Removing the insert and gear from the elbow sleeve
Tool Name
Assembly pliers (Mat. no. 0.411.3921)
Wrench (Mat. no. 0.411.1881)
Universal bit holder (Mat. no. 1.002.4577)
Torque handle (Mat. no. 1.003.1524)
180 Ncm
Clamping sleeve (Mat. no. 0.411.4451)
▶ Take hold of the elbow sleeve ① with the circlip pliers and turn the wrench, uni‐
versal bit holder and torque handle anticlockwise to unscrew the threaded ring ⑤.
▶ Slide the adapter sleeve into the insert ④ and push the spring pin into place.
▶ Pull the insert ④ out of the elbow sleeve ① and remove the adapter sleeve.
▶ Push the bearing cartridge ② and axle ③ right back and out.
▶ Remove the axle ③ from the bearing insert ②.