KaVo GENTLEpower LUX Contra-angle 25 LP, Инструкции техника

Страница: 10 / 20

Technician's instructions GENTLEpower LUX Contra-angle 25 LP - REF 1.001.2849
3 Assembly | 3.1 Assembly of the GENTLEpower LUX Angle Piece 25 LP
10 / 20
3 Assembly
3.1 Assembly of the GENTLEpower LUX Angle Piece 25 LP
3.1.1 Assembly instructions
Material numbers for spare parts are listed in the separate spare parts sheet.
See also:
2
Spare parts list for the GENTLEpower LUX Angle Piece 25 LP
Requirement
All parts must be cleaned thoroughly.
Glued joints must be clean; there must be no traces of grease or adhesive residue.
Check air and water hoses for free passage.
Note
Once assembled, the contra-angle handpiece has to be sprayed thoroughly with
KAVOspray.
3.1.2 Assembling the bearing cartridge
Tool Name
Mounting device A (Mat. no. 1.002.3804)
Mounting device B (Mat. no. 1.002.3802)
▶ Apply a thin layer of grease to the O-ring ③, insert into the groove on mounting
device A, pull back the slide on mounting device A and hold in place.
▶ Insert mounting device A into the drilled hole on the bearing sleeve ④ and slide
the O-ring ③ into the first groove on the bearing sleeve.
▶ Apply a thin layer of grease to the O-ring ②, insert into the groove on mounting
device B, pull back the slide on mounting device B and hold in place.
▶ Insert mounting device B into the drilled hole on the bearing sleeve ④ and slide
the O-ring ② into the second groove on the bearing sleeve.
▶ Push the intermediate drive ① into the bearing sleeve ④ as far as the stop.