KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 46 / 52

Instructions for use DIAGNOcam Vision Full HD
9 Information concerning the electromagnetic compatibility according to EN IEC 60601-1-2 | 9.1 Electromagnetic
Transmissions
46 / 52
9 Information concerning the electromagnetic
compatibility according to EN IEC 60601-1-2
9.1 Electromagnetic Transmissions
The DIAGNOcam Vision Full HD is designed for use in an environment of the
kind specified below. The customer or the user of the DIAGNOcam Vision Full
HD should ensure that the device is used in an environment of the specified
type.
Measurements of emitted in-
terference Conformance Electromagnetic environment
-
Guidelines
HF emissions according to CISPR
11 Group 1 The DIAGNOcam Vision Full HD
uses HF energy exclusively for its
internal functions. Therefore, the
HF emission of the device is very
low and interference with adja-
cent electronic devices is unlikely.
HF emissions according to CISPR
11 Class B The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.
Emission of harmonics according
to EN 61000-3-2 Class A The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.
Emission of voltage fluctuations/
flicker according to EN 61000-3-3 Conforms The DIAGNOcam Vision Full HD is
suitable for use in all equipment,
including devices in living areas,
and suitable for equipment,
which is directly connected to
supply mains that also supply
buildings used for residential pur-
poses.