KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 33 / 52

Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.4 Recording images
6.4.3 Transillumination mode
CAUTION
Possibly hazardous optical radiation emitted by product.
Risk of injury.
Do not look into the active light source.
The DIAGNOcam Vision Full HD produces images reminiscent of X-ray images,
but which are completely radiation free - by means of a light that is especially
adapted to this examination method. The tooth structures allow the passage of
light from the entry site to the camera. Areas that block light transmission (e.g.
carious lesions) show up clearly as well delimited, dark areas. The camera cap-
tures the actual situation and visualises it in real-time on the screen.
In this mode, the DIAGNOcam Vision Full HD camera records images in transil-
lumination for the detection of occlusal caries, proximal caries, secondary caries
and cracks.
Proximal caries Occlusal caries Secondary caries
The DIAGNOcam Vision Full HD can detect caries in the enamel, but not in the
dentin. Healthy dental enamel is shown bright in the image, whereas carious
sites are shown as dark spots.
In Transillumination mode, the tip must be attached.
The LEDs in the tip (plugged onto the camera) are situated on the left and right
and emit near infrared light.
1
①
Tip
Recording an image in Transillumination mode
▶
Connect the camera to the computer.
▶
Start up the imaging software.
▶
Remove the camera from the camera holder.
▶ Apply the sheath first before you attach the tip to the camera.
See also:
2 6.2 Use a sheath, Page 26
▶
Plug a tip onto the camera to be able to use the Transillumination mode.
33 / 52