KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 28 / 52

Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.3 Snap-in and detach the tip
28 / 52
▶
Then reprocess the camera and accessories according to recommendations.
See also:
2 7 Reprocessing steps in accordance with ISO 17664, Page 37
6.3 Snap-in and detach the tip
Plug the tip onto the camera
NOTICE
Damage from tip being plugged on inaccurately.
Inappropriate attachment of the tip can lead to damage on the camera and the
tip.
▶
Make sure that the contours of the camera align with those of the tip.
▶
Do not force the tip to snap-in.
▶
Do not slide the tip in axial direction.
▶ Before the first use process the tip in accordance with the instructions for
use.
See also:
2 7 Reprocessing steps in accordance with ISO 17664, Page 37
▶
Apply the sheath first before you attach the tip to the camera.
See also:
2 6.2 Use a sheath, Page 26
▶ Position the tip on one side of the housing and carefully snap-in into the op-
posite side.
▶ Check on the stable positioning of the tip.