KaVo DIAGNOcam Vision Full HD, Инструкция по эксплуатации

Страница: 26 / 52

Instructions for use DIAGNOcam Vision Full HD
6 Operation | 6.1 Start up of the camera
26 / 52
6 Operation
6.1 Start up of the camera
▶ Use the USB cable to connect the camera to the computer.
▶ Start up the imaging software.
The camera can be switched on by the following means:
▪ System start of the imaging software
▪ Pressing any button on the control panel
▪ Removal of the camera from the table holder or wall mount
6.2 Use a sheath
Apply the sheath
WARNING
Risk of infection due to soiled or contaminated camera.
Infection.
▶
Always use the camera with a sheath only!
▶
Renew the sheath after each treatment!
▶
Do not use damaged sheaths!
▶
Wipe the camera down with disinfectant after use!
Note
Sheaths (100 pcs) can be ordered Mat. no. 1.013.5711 .
▶ Remove the camera from the holder.
▶
Slowly apply the sheath over the camera to allow the air to escape.
▶
Remove the outer protective paper.