Kato SR-300L, Инструкция по эксплуатации

Страница: 41 / 233

- 28 -
7) Seek button (SEEK)
Pressing this button will automatically search for and stop at the
next available station.
8) Band button (BAND)
Press this button to switch between AM (MW) and FM
frequency bands.
9) Tuning buttons (TUNE)
Press the "up button
(
∧
)" to increase the frequency and "down
button ( ∨
)" to decrease the frequency. Hold the button down to
increase/decrease frequency rapidly.
(2) Replacing fuses
The radio is equipped with an internal fuse, which cannot be replaced.
If a fuse failure is suspected, contact your authorised KATO dealer for service.
Do not attempt to replace the fuse by disassembling the radio.
Doing so could cause smoke or fire.
(591A-1099-0E)
(3) Listening to the radio
1) Turn the starter switch to the "ON" position and supply power to
the radio.
2) Press the "BAND" button to select either AM (MW) or FM.
3) Use the preset buttons or tuning buttons to select the desired
station.
4) Adjust the volume and tone as desired.
5) To turn the radio OFF, turn the "VOL" knob to the left until it
clicks.