Kato SR-300L, Инструкция по эксплуатации

Страница: 191 / 233

- 175 -
18. Crane operation
(1610-0030-1E)
This crane is reasonably simple to operate, but even small slips can cause major accidents, so always work steadily one
step at a time.
18-1 Preparations for crane operation
(4210-3246-0E)
18-1-1 Preparations before operating the crane
(611A-0040-0E)
(1) Move the crane to the firm ground. Fully retract the suspension lock cylinders to lock the suspension.
(2) Set the PTO switch to the "ON" position.
The ACS will begin its self-diagnostic process at that point.
(3) Outrigger setting
1) Use the outriggers to set the crane in a level position. As a rule,
fully extend all outriggers as far as possible when leveling the
crane and inset the stopper pins in each outrigger to check the
extension width.
2) Check that all tires are lifted off the ground.
(4) ACS setting
1) Set the outrigger setting status that corresponds to the outrigger extension width on the working status setting
screen.
2) Set the boom status that corresponds to the boom operation status on the working status setting screen.
3) Press the ACS display switch to complete the ACS setting.
(5) Perform the ACS preoperational check procedure.
Be sure to perform the ACS preoperational checks before starting crane operations.
1) Press the function switch to display the ACS preoperational
check screen. Check that the ACS is working correctly.
2) After inspection, return the display to the ACS screen.