14 of 40
Operating the Device Using Buttons
10.2 Operating the UFX 100 Menu
The LCD display starts to initialise the program as soon as the power supply is connected to the
device.
First, go to the sub-menu to adjust the modulation to the transmission standard (DVB-C,
DVB-T or ISDB-T) of your TV set that is being used to receive the RF signal.
Reboot the device when you have changed the modulation. Sub-menus
⑩
–
⑱
vary
depending on the transmission standard selected in
⑲
.
In these operating instructions, the menu is explained using the
DVB-T
transmission
standard as an example.
The following symbols are used for the buttons:
Button
Symbol
Up button
Down button
LOCK
ENTER
MENU