17 of 40
Encoder
4
Video
Interface
Resolution
Video Bit rate
Rate Mode
H.264 Profile
H.264 Level
Brightness
Contrast
Saturation
Hue
edits the video parameters below
selects an interface type from the specified options
The UFX 100 automatically detects a valid video format and begins the encoding.
resolution of the signal source (display only)
1 – 19.5 Mbps
CBR or VBR
high or main
3.0, 3.1, 3.2, 4.0, 4.1 or 4.2
0 – 128
0 – 255
0 – 128
-128 to +127
5
Audio
Audio Bitrate
Audio Format
HDMI audio input
edits the audio parameters below
selects an audio bit rate from the specified options
Every audio format has its own bit rate range.
MPEG1 Layer II, MPEG2-AAC or MPEG4-AAC
switches HDMI on or off
6
Program Info
Program output
Program Name
Service Name
PMT PID
PCR PID
Video PID
Audio PID
LCN
edits the programme information below
decides whether or not the program is outputted
programme name
service name
PID number of the PMT (
Program Map Table
)
Reference time (
PCR
,
Program Clock Reference
) of the transport stream
PID number of the video signal
PID number of the audio signal
programme number
TS Config
7
TS ID
transport stream ID
►
Press
ENTER
to change the new value.
8
Ori Net ID
original network ID
►
Press
ENTER
to change the new value.
9
NIT
NIT Insert
Private data
Network ID
Network name
Version Mode
Version number
LCN Mode
displays, changes or selects NIT values from specified options
switches
NIT Insert
on and off
defines the 8-bit field
network ID
network name
automatic or manual
version number (display only)
European, NorDig or NorDig V2
