18
SAT
Example
To enter the frequency 1508 MHz:
press
[1] [5] [0] [8] [OK]
LC display:
• Frequency: 1508.0 MHz
• Operating mode: SAT
• Level: 86.5 dBµV (A = analogue)
A “+” or “-” on the display means that the MSK 125 has not been
adjusted precisely to the desired carrier. Use the
[<]
and
[>]
buttons
to refi ne the frequency for optimum reception. A vertical line on the
display indicates optimum frequency adjustment.
Complete your frequency entry by pressing the
[OK]
button. The
most recent frequency setting remains even after you switch the
MSK 125 off if it has been entered with digits and confi rmed by
pressing
[OK]
.
Note
“SAT ANALOGUE” LEVEL MEASUREMENT
After you have set a frequency the level is measured automatically
and indicated on the LC display in dBµV or dBmV (depending on
the basic confi guration). The input level can be measured in the
range of 30 dBµV to 120 dBµV (-30 dBmV to 60 dBmV).
LC display:
• Frequency: 1508.0 MHz
• Operating mode: SAT analogue
• Measured level: 86.5 dBµV A
Level overfl ow and underfl ow
At a level < 30 dBµV the LC display indicates an underfl ow. The
following details are displayed:
• Frequency: 1508.0 MHz
• Operating mode: SAT analogue
• Level: Underfl ow
