8 of 56
Safety Instructions and General Guidelines
Proper Installation and Safety
The system may be installed only by qualified specialist personnel!
To prevent hazards during installation, operation or when driving on public highways, the instructions
and information in this manual must be strictly adhered to. Proper installation and connection of the
system are prerequisites for conformity with the corresponding standards.
This is documented in advance by the CE mark and the declaration of conformity in the appendix to
this manual.
Essential information
A crucial safety factor is proper performance of installation and electrical connection work, and the specified alignment
of the turntable in the direction of travel (park position), see Chapter 5, p. 12.
►
Comply as precisely as possible with the installation conditions and steps described.
Adhesive sealant
The turntable is attached to the roof of the vehicle by adhesive and is secured by additional screws.
Note that the curing of the adhesive sealant is temperature-dependent. It reaches its full strength only after approxi-
mately 2 days.
NOTICE
Risk of material damage due to improper use of the adhesive sealant!
►
During installation work, comply strictly with the processing and safety instructions for the adhesive
sealant (DEKAsyl MS adhesive sealant safety data sheet and DEKAsyl MS adhesive sealant technical
data sheet).
Road Traffic Licensing Regulations (StVZO)
The applicable regulations of the German StVZO must be observed in respect of fixed installation of the turntable on
a vehicle which is driven on public highways. In particular, Articles 19/2; 30 C; 32 (2) and EC directive 74/483 EEC are
applicable.
Briefly, they state that no endorsement of the vehicle documentation is required unless the antenna unit causes the
height of the laden vehicle to exceed 2 m, or the antenna unit projects beyond the outer lateral outline of the vehicle. The
maximum permissible height of 4 m for the vehicle and antenna unit must not be exceeded.
Содержание MobiSet 3 Twin CAP 650
Страница 36: ...36 of 56 Technical Data 10 2 Dimensions in mm 118 3 118 3 282 153 6 Mounting plate 145 66...
Страница 47: ...47 of 56...
Страница 54: ...54 of 56 Declaration of Conformity 15 Declaration of Conformity...
Страница 55: ...55 of 56...