Kathrein MobiSet 3 Twin CAP 650, Перевод оригинального руководства по эксплуатации

Страница: 49 / 56

49 of 56
13.1 Safety Instructions and General Guidelines
In the following operating manual we assume that the CAP converter and the turntable have been properly installed
and connected, as described in Chapter 4, p. 7 and Chapter 5, p. 12. If you have not yet done so, read the safety
instructions at the beginning of this manual and follow them when handling the CAP converter and the turntable!
Tip
Before setting up your satellite system, make sure that the location allows a free view to the satellite positions
to the south and is not shadowed by trees or other obstructions.
NOTICE
Risk of malfunction and material damage from:
Overheating of the turntable motor!
If the turntable motor operates without interruption for longer than 20 minutes, it can cause overheating of the
motor. None of the automatically initiated search procedures require as much as 20 minutes. Only repeated
unsuccessful search procedures or manual overrides by the user can cause this limit to be exceeded.
►
Do not let the turntable motor continuously run for longer than 20 minutes.
Absence of the ignition signal!
As soon as the ignition signal is no longer present at the turntable, it may automatically move to the last known
satellite position. Requirement: The receiver is switched on and the turntable is supplied with a +12 V power
supply.
guter Empfang
kein Empfang
Reception
No r
eception