Kathrein HDS 910, Руководство по эксплуатации

Страница: 11 / 44

11
INSTALLATION AND CONNECTION
Use of other screws:
If because of the installation location or fac-
tors associated with it, the screws supplied
cannot be used, refer to the diagram along-
side when selecting the screws to be used.
This shows you the cross-section area of
the screw sockets on the control unit and
shows which screws (diameter, screw head
pro
fi les etc.) can be inserted into the con-
trol unit support.
To prevent inadvertent disconnection of
the power cables, secure them in accord-
ance with DIN EN 1648-1 and -2. Ensure
the cables are
fi tted with strain relief!
Cable
ties *
)
*
)
When upgrading a CAP 100 system, the 8-pin cable adapter and
the power supply adapter should be used as shown. To prevent
inadvertent disconnection of the plug connectors, we recommend
they are secured with a cable tie or insulation tape, as shown
above!
Air circulation