manualshive.com logo in svg

Kathrein HDS 910, Руководство по эксплуатации

Поделиться
Скачать
Kathrein HDS 910 Скачать руководство пользователя страница 20

20

  Avoid laying the cables across sharp edges and secure the cables against possible cha

fi

 ng 

points.

•  Connect the coaxial cable (coming from the turntable) to the “IF IN” F socket on the rear of the 

UFS 940sw.

•  Place the infra-red sensor for the receiver close to or directly on top of the TV set and lay the 

cable to the UFS 940sw. Connect the 6-pin Western connector at the rear to the socket marked 
“IR REMOTE IN” (see also “Installation of the UFS 940sw receiver” in this section).

Isolate the on-board power supply (master switch “off” or disconnect the positive pole of the on-board 
power supply battery) before commencing the following work:

• 

Connect the power cable supplied (depending on the power supply available in your motor home or 
caravan, either a 12 V supply or a 230 V supply via a power supply unit) to the “

” plug 

connector on the receiver.

 

Make sure that the “inline” integrated fuse (5 A) of the cable is fully plugged in and is intact. If the 
fuse blows, the source of the fault must 

fi

 rst be eliminated. The fuse must only ever be replaced 

by a fuse with the same rating (5 A).

CONNECTING TO THE UFS 940SW

LAYING CABLES AND CONNECTING THE TURNTABLE

The receiver must be connected to no other power supply than 12 V DC. The 
receiver’s earth connection must be connected to the negative pole of the motor 
home or caravan battery.

• 

At the connecting point for the power cable, the voltage must not fall below 10.9 V even with a load 
of 12 A. Otherwise optimum functioning can no longer be guaranteed.

• 

Connect the power cable to the respective socket in your motor home or caravan (12 V or 230 V).

• 

Check the connections before you re-connect the on-board power supply.

•  For commissioning and more detailed information on additional operator functions, please consult 

the operation section of the separate operating manual for the receiver.

The fuses in the cable and in the receiver must never be by-passed – cable 

fi

 re hazard!

INSTALLATION AND CONNECTION

Содержание HDS 910













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды