Kathrein HDS 910, Руководство по эксплуатации

Страница: 31 / 44

31
This menu allows important basic settings for the CAP, such as the elevation
border or elevation offset to be set. These two settings in particular should be
performed by a specialist to match your needs and the conditions; if they are
set incorrectly the CAP may be damaged!
Use the

buttons to select the “CAP settings” line and press the

button to con fi rm.
The following display appears:
CAP SETTINGS
CAP MENU (TURNTABLE ANTENNA SETTINGS)
Neither of these settings should be changed unless the change is necessary because of neighbouring
roof structures or other obstacles. The settings are made using the cursor buttons (

) or the
numeric keys.
ELEVATION BORDER AND ELEVATION OFFSET
In the fringe areas of the satellite footprints it may happen that a better search result is obtained by using
a lower CAP search speed. If the “Regular” search speed does not give satisfactory search results,
you can reduce the search speed to “Slow”.
If the signal strength and quality are good however you can set search speed to “Quick”. Normally we
recommend the search speed is set to “Regular”.
Make the settings using the

buttons.
SEARCH SPEED
Press the

button; the CAP will
move to the park position. As soon as
the turntable reaches the park position,
the following display appears:
MOVE CAP TO PARK POSITION