IP Phone User Manual
39
/
42
Ping
Test the connectivity
between your KT101
and a specified network
device.
1)
Select the [Ping] item and press
<OK>.
2)
Enter
the
IP
address
of
the
destination and press <OK> to begin
testing.
The LCD displays information in the
format of Success/Total */#, among
which:
*: A number indicating the number of
successfully received packets.
#: A number indicating the total
number of the sent packets.
My Number
Check
the
phone
number of your KT101.
Select the [My Number] item and press
<OK>. The LCD displays the phone
number of your KT101.
DHCP Again/Redial
PPPoE
Obtain an IP address
again
or
redial
to
establish
a
PPPoE
connection when your
KT101
operates
in
DHCP or PPPoE mode.)
Select the [DHCP Again/PPPoE] item
and press <OK>.
AutoDown NET
Set the criterion for the
PPPoE connection to be
automatically
terminated. This item is
visible only when your
KT101
access
the
network using PPPoE.
Select the [AutoDown NET] item and
press <OK>. At the prompt of ―AutoDown
Timeout‖. press <UP> or <DOWN> to
select one of the following items:
Disable: Specifies not to terminate
the PPPoE connection automatically.
Right now: Specifies to terminate the
PPPoE connection at once.
After 10 min: Specifies to terminate
the PPPoE connection automatically
after your KT101 is idle for 10
minutes.
After 4 min: Specifies to terminate
the PPPoE connection automatically
after your KT101 is idle for 4
minutes.
After 1 min: Specifies to terminate
the PPPoE connection automatically
after your KT101 is idle for 1 minute.
Press
<OK>
to
confirm
your
changes.
Note:
Your KT101 comes up with a factory-set NTP server network address, through which your
KT101 can automatically acquire correct time once it is set up and connected to the Internet. So
do not change the NTP server address unless absolutely needed.
Содержание KT101
Страница 1: ...KT101 Broadband IP Phone User Manual ...
