Kasda KT101, Руководство пользователя

Страница: 19 / 42

IP Phone User Manual
19 / 42
•
Subnet mask: Subnet mask of the PC interface, which defaults to 255.255.255.0.
•
MAC Address: MAC address burned into the PC interface, which you cannot change.
Remember to click <OK> to save your changes upon completion. You can also click
<Cancel> to discard your changes.
Note:
Settings of IP address, subnet mask, and MAC address for the PC interface take effect
only when the forwarding mode is set to NAT.
III. Configuring VLAN
Click the [VLAN] tab. The [VLAN Setting] page appears (as shown in Figure 3-8),
displaying the items for specifying the VLAN parameters.
Figure 3-8 Web configuration
– VLAN Setting
Your KT101 supports the use of VLAN tag, which can increase the transmission rate of
RTP voice packets. Supports from the network are required for this function to take
effect. Consult your carrier or administrator for related information.
Items in this page are described as follows:
•
Enable Tag: Specifies whether to enable the VLAN tagging function. The default
setting is Disable, that is, the VLAN tagging function is disabled by default.
•
VLAN ID: VLAN ID, which can be obtained from your carrier or administrator.
•
Priority: Priority of the VLAN tags.
Remember to click <OK> to save your changes upon completion. You can also click
<Cancel> to discard your changes.
Caution:
Enable the VLAN tagging function only when you are sure that the network to which your