Kasda KT101, Руководство пользователя

Страница: 25 / 42

IP Phone User Manual
25 / 42
4
Configuration Example
4.1 Accessing Networks through PPPoE
4.1.1 Scenario
Intended users: Families or enterprises that access the Internet through ADSL or any other
PPPoE connections. Number of the available broadband connections: One.
Devices required: one KT101 and one PC. Objective: The KT101 can be used to place
calls while the PC can access the Internet through the KT101.
4.1.2 Installing Hardware
Set up the KT101
and connect the PC to it. Refer to Chapter 2 ―Installation‖ for details.
4.1.3 Configuring Software
I. Configuring network parameters
Before configuring the network parameters, consult your carrier for the PPPoE user
name and password required for the following configurations.
1) Configuring the network connection type As DHCP is the default network
connection type, you must set the connection type to PPPoE and specify the
PPPoE user name and password. Refer to section 3.2.1 II. ―Configuring the
network connection type‖for details.
2) Configuring the forwarding mode For PPPoE access method, the forwarding
mode of NAT is recommended. With your KT101 operating in this forwarding
mode, the built-in DHCP service is automatically enabled, and your KT101
functions as a gateway, while the PC can access the Internet through your
KT101. As the default forwarding mode is Bridge, you need to change the
set
ting to NAT manually. Refer to section 3.2.1 III. ―Configuring the forwarding
mode‖ for details.
II. Configuring protocol parameters
After configuring the network parameters, you must also configure the protocol parameters
for your KT101 to register wi
th the server of your carrier. Refer to section 3.2.2 ―Configuring
Protocol Parameters‖(for LCD-based configuration) or section 3.3.3 ―Configuring Protocol
Parameters‖(for Web-based configuration) for details.