Kasda KT101, Руководство пользователя

Страница: 11 / 42

IP Phone User Manual
11 / 42
To… Do the following…
Enter the main menu Press <MENU>
Select an item from
the menu
Press <UP> or <DOWN> to move the prompting
arrow to the desired item Press the button for the
digit corresponding to the item
Enter a submenu Press <OK>
Confirm your
selection or input
Press <OK>
Change a setting
Do the following to change the value of a
parameter:
1) Press <OK> to enter the editing mode of the
currently selected parameter.
2) Press buttons as needed to enter a new
value for the parameter, or press
<UP>/<DOWN> to select one from the
available values.
3) Press <OK> to confirm your changes, or
press <C> to discard them.
Note that:
1) For some parameters with optional values,
you can simply press <OK> to select one
without entering the editing mode.
2) When editing the value of a parameter, you
can move the cursor by pressing
<UP>/<DOWN>, or delete a character by
pressing <DEL>.
Return to the upper
level menu
Press <C>
Exit the configuration
interface Pre
ss <C> repeatedly until the LCD displays ‖IP
Phone…‖
3.2.1 Configuring Network Parameters
From the [Networks] menu, you can configure the network connection type, the forwarding
mode, DMZ, static port mapping, and so on. This section describes the hierarchy of the
[Networks] menu and the procedures for you to set the network connection type and
forwarding mode in different scenarios. These configurations are required for your KT101
and the PC to access the LAN or Internet. ADSL network mode means PPPoE here.
I. Hierarchy of the network configuration menu
Table 3-2 Hierarchy of the network configuration menu
Menu/item/value Description
External
NIC
IP Mode
User
Specify Static address
mode
Use the [IP Mode] menu to specify
the way for your KT101 to obtain the
IP address of the LAN interface.
DHCP DHCP mode
PPPoE PPPoE mode
IP Address:
IP address of
the LAN
interface These items are available only when
you set the IP Mode argument to
User Specify.