Kasco marine 3.1JF, Руководство пользователя

Страница: 13 / 24

NOZZLE OPTIONS & PATTERN SIZES
NOTE: Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or voltage drop
due to long power cords may result in reduced pattern sizes.
•
All five (or six) nozzles are included with the package.
•
The Linden, Willow, and Juniper nozzles use the 3/8” x 4” bolt.
•
The Sequoia (5.1JF only) uses the 3/8” x 2.5” bolt.
•
The Redwood nozzle must have the Y Insert installed prior to nozzle placement.
•
The Spruce nozzle must have the Insert removed prior to nozzle placement.
•
The Birch display does not require a nozzle.
13
The Redwood
nozzle uses the 3
self tapping screws
to attach over the
pump housing and
the
Y Insert must
be installed .
REDWOOD
Model HP Height Width
8400JF 2 22' 7'
3.1JF 3 24’ 8’
5.1JF 5 26’ 8’
The Linden
nozzle (marked
L inside one of
the fins) uses the
3/8” x 4” bolt.
LINDEN
Model HP Height Width
8400JF 2 18' 30'
3.1JF 3 19’ 35’
5.1JF 5 20’ 35’
The Willow
nozzle (marked
W on the
inside of the
cone) uses the
3/8” x 4” bolt.
WILLOW
Model HP Height Width
8400JF 2 12.5' 28’
3.1JF 3 13’ 25’
5.1JF 5 14’ 36’
The Juniper
nozzle (marked
with J on in
inside of the
nozzle cone)
uses the 3/8” x
4” bolt.
JUNIPER
Model HP Height Width
8400JF 2 8' 46’
3.1JF 3 9’ 48’
5.1JF 5 10’ 50’
The Spruce
nozzle uses the
three self tapping
screws to attach
over the pump
housing and the
Y
Insert must be
removed.
SPRUCE
Model HP Height Width
8400JF 2 19' 10’
3.1JF 3 21’ 13’
5.1JF 5 24’ 15’
The Birch display does not use a nozzle or bolt.
It is the fountain unit running without any
nozzle and allows for the best flow rate and
oxygen transfer!
BIRCH
Model HP Height Width
8400JF 2 12' 11’
3.1JF 3 14.5’ 10’
5.1JF 5 14’ 12’
SEQUOIA The Sequoia nozzle
(marked S on the inside
of the cone) uses the 3/8”
x 2.5” bolt.
5.1JF ONLY
Model HP Height Width
5.1JF 5 21’ 10’