kas.com.au
kas.com.au
4.
Fingerprint ID (set previously) E.g 3
Controller ID will be set 2550003
Working as a Slave Reader connecting to Controller Wiring Diagram
Working as Controller connecting to a Slave Reader
The KAS-322-FP supports Wiegand input. Any card reader, which supports
Wiegand 26 interface can connect to it as its slave reader, including ID and IC.
Keycards must be added at the slave reader, not the controller unless an EM card
reader is used. EM Cards can be added either by slave reader or control.
Working as Controller connecting to a Slave Reader Wiring Diagram
Using Two Access Controls On One Door
Two KAS-322-FP can be used on a single door, creating the need for users to be
verified upon entering and exiting.
The information on the 2 devices is shared so users can enroll on either device,
gaining access on both sides of the door. This doubles you current memory to
6000 users.
Note: The settings, Master code and Master fingerprints for the 2 controls must be
the same. If they are not the same the controls will act as individual controls and
you will need to add users on both controls etc.
Using Two Access Controls On One Door Wiring Diagram
Two Devices Interconnected & Interlocking- Two Doors
This high security feature is designed for areas that have 2 doors accessing the
same area eg, banks, safe rooms.
The interlocked function will work on either door. One door must be locked for the
other to unlock and open.
1.
Scan Keycard or fingerprint on first access control
2.
Enter first door
3.
Shut first door
KAS
-320
-FP
KAS-320-FP
KAS-320-FP Controller 1
KAS-320-FP Controller 2