kas.com.au
kas.com.au
Features
•
Infrared remote control & master cards for programming
•
3000 users, includes 1000 fingerprint users and 2000 keycard users
•
Card interface: EM 125KHz card
•
Wiegand 26 input & output (Entry and Exit pass code needed compatibility)
•
Standalone or Wiegand reader mode
•
Adjustable door output time, alarm time, door open time
•
Anti-magnetic & lock output current short protect
•
2 fingerprint access controls can be connected to the 1 door
•
Red, yellow and green LED display the working status
•
High Security Interlocking option
Installation
Remove the back cover from the device, undoing the screw at the base of the
device
Using the back of the Access control as a template, mark the 4 holes onto the wall
for the screws and 1 hole for the cable
Fix the back cover firmly on the wall with 4 flathead screws
provided
Thread the cable through the cable hole
Attach the device face to the back cover
Sounds and Lighting
Operating Status
LED
Fingerprint
Sensor
Buzzer
Reset to factory default settings
Orange
-
2 Short Rings
Sleeping Mode
Red Glow
-
-
Stand by
Red Glow
Shine
-
Enter into programming mode
Red Glow
-
Long Ring
Wrong operation
-
Long Ring
Access granted- Open door
Green Glow
-
Long Ring
Alarm
Flashing Red
-
Alarm
Rest to Factory Default
This reset will clear all stored Manager Cards, Manager fingerprints, user
fingerprint, keycards and settings.
1.
Power off device
2.
Press the RESET Key on the inside of the Access Control
3.
Holding the RESET Key in- Power on
4.
After you hear 2 short beeps- release the key
5.
LED will shine Orange- YOU NEED TO ADD THE MANAGER CARDS
6.
Swipe Manager ADD Card
7.
Swipe Manager DELETE
8.
Factory Reset Complete
