Kartsana Silver TG-1100, Инструкция по эксплуатации

Страница: 29 / 40

OPERATING AND HANDLING
SILVER STRETCHER
27
Rev.4
28.11.22
2.3.13. Transferring the patient to the stretcher.

To transfer the patient to the stretcher:
1. Bring closer the stretcher to the patient.
2. Place the stretcher beside the patient and raise or lower the stretcher to the level of the
patient.
3. Lower the siderails and open the restraint belts.
4. Transfer the patient to the stretcher using accepted emergency medical procedures.
5. Use all the restraint belts to secure the patient to the stretcher.
6. Adjust the backrest and foot rest as necessary.

When rolling the stretcher:
1. Make sure that all the restraint belts are securely buckled around the patient.
2. Position an operator at the foot end and one at the head end of the cot always when
rolling the cot with a patient on it.
3. Approach door sills and/or other low obstacles squarely and lift each set of wheels over
the obstacle separately.

Proper lifting techniques
When lifting the cot and patient, there are basic guidelines to help you avoid injuries:
- Keep your hands close to your body.
- Keep your back straight.
- Coordinate your movements with your partner and lift with your legs.
- Avoid twisting.
- Always use the stretcher as we describe in this manual.
3. FAULTS
If the hydraulic system breaks down, pull red trigger located next to the batteries at the rear. The
stretcher will go down until the lower limit is reached and will remain in this position.