OPERATING AND HANDLING
SILVER STRETCHER
12
Rev.4
28.11.22
Once both batteries have been installed the system will be powered by battery 1, when this
runs down, the system will automatically switch to battery 2. Both will recharge when the
stretcher is on the rail and inside the ambulance.
The level screen also shows us any possible system errors. In the following table we will
show all the incidences that the display can show.
FAILATURE MESSAGE
CODE
LEDS
R
R
Y
Y
Y
G
G
G
G
Load tension error (ambulance entrance) VERY
LOW
2
ON
Load intensity error VERY HIGH
3
ON
O
N
Error in battery charge due to lack of ambulance
tension or connection switch
4
ON
End of battery charge (by Vmax or time)
5
ON
O
N
Reserved
6
ON ON
Charge error due to low battery.
7
ON ON
O
N
Charge error due to exceeding the maximum
PWM duty cycle
8
ON
Upwards movement error due to excess time.
9
ON
O
N
Downwards movement error due to excess time.
10
ON
ON
Engine failure due to exceeding maximum
intensity.
11
ON
ON
O
N
Engine failure due to low tension.
12
ON ON
Содержание Silver TG-1100
