OPERATING AND HANDLING
SILVER STRETCHER
10
Rev.4
28.11.22
2.3. Operating and handling the stretcher
2.3.1. Installing the battery
The first step when working with SILVER is to install the 24 V battery which power the
system. To do this, we place the battery opposite their housings at the front-right of the
stretcher and push until it locks.
To remove the battery, press the small trigger located on the lower left-hand side and
pull carefully.
The battery life under normal circumstances (from 80 to 120 kg load) should be about
20 cycles.
Information note:
The front part of the stretcher corresponds to the head part.
Batteries are delivered with a minimum charge. Prior to operating the bed we charge the
batteries with the charger supplied, until the LED turns green it. After that we can work
normally.
Trigger to
remove battery
Содержание Silver TG-1100
