Halogen lamps
ELECTRICAL INSTALLATION
6-4
Shower light
Changing the bulb: press together the
transparent cover at Points A and remove.
Push the bulb into the holder and turn by 90
degrees.
Rating of individual lamps:
Built-in light:
12 V/5 W
Surface-mounted light:
12 V/10 W
Wardrobe light:
12 V/ 10W
Alcove light:
12 V/10 W
Shower light:
12 V/ 5 W
Built-in halogen spots
The halogen spots are fitted with halogen
bulbs of different power ratings.
To change the bulb, first switch the power
supply off.
The lamp glass is held by a clamping ring.
With a small screwdriver, press this ring
together unit it can be levered over the
retaining lug.
Pull the halogen bulb out of its holder.
When installing, proceed in reverse order.
Note
Do not touch the glass body of the new bulb
with unprotected fingers because any
fingerprints left on it can considerably
shorten its service life.
Alcove light
To change the bulb, switch off the power
supply.
Pull the head off the swan-neck and the
halogen bulb out its holder.
When installing proceed in the reverse
order.
,5
Do not turn the alcove light towards the
roof. Keep a safe distance of 10 cm
between the light and all other objects,
such as bedding, for example.
Avoid creating hot spots which can be
caused by leaving top cupboard doors
near halogen spots open. Too-long
exposure to heat can lead to
discoloration of the door surfaces.
Caution
A
A
