Karel MS48IP страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 96

background image

MS48IP Programming Guide

1

INTRODUCTION

Thanks to the rich software structure of the systems, several parameters related to
the operation of the MS Series exchanges can be modified according to customer
requirements. The modifications are done through program codes.

The system can be programmed only through telephone of the system supervisor
(by default the first extension of the system). A different extension can be assigned
through programming by the system supervisor.

The  system  cannot  be  programmed  during  normal  operation  mode.  It  should  be
switched  to  programming  mode  by  the  System  Supervisor.  Following  all  the
modifications  of  parameters  in  programming  mode,  those  modifications  must  be
saved in the memory and then the programming mode should be exited. Unless the
modifications  with  the  parameters  are  saved,  the  parameters  will  have  to  be
programmed again, in case of any power failure.

The  structure  of  the  program  codes  is  standard.  For  all  programs,  there  is  a
maximum six-digit program code, followed by parameter codes. Details about those
parameters  have  been  included  in  the  descriptions  of  the  related  programs.
However,  there  is  an  important  point  about  extension  and  line  access  codes  that
should be emphasized: In several programs, extension or line  access codes must
be entered as a parameter. One should be careful, during the entry of the extension
or line numbers while programming,

In the following pages of this guide, the program codes related to various parts of
the systems have been presented in the form of groups. The purpose is making it
easy for the programmer to find the programs for the related module, as well as
providing conceptual integrity.

It is recommended that all of the programs below should be read and all the codes
to be entered during the programming should be determined prior to programming.
An alternative of the system supervisor’s telephone to be used to program the
system is the Net-Console PC program, which is a very user friendly software tool
to program the exchanges.

IMPORTANT NOTE:

Due to their own operating principles of IP phones, functions

of some programs may vary on them.

«
...
7
8
9
10
11
...
»

Содержание MS48IP

































































































Отзывы:

Нет отзывов

Похожие инструкции для MS48IP

ATLAS GENTECH TSS308GE-A NZ

Бренд: GE Страницы: 42

Бренд: Zycoo Страницы: 18

Бренд: ZYCOD Страницы: 61

Бренд: Orchid Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды