Karel MS48IP, Руководство по программированию

Страница: 83 / 96

MS48IP Programming Guide
75
Entering a New Numbering Plan (Following Reset):
§ Fill in the Access Table form.
§ If you clear the access codes of some non-existing extensions in the system in
order to assign them to the existing extensions, or, in order to utilize the starting
figures of them (eg. utilizing 2 in a system without an extension whose number
starts with 200), then enter Inaccessible next to that extension in the form.
§ Initiate the Flexible Numbering by dialing 8869.
§ If there are lots of conflicts in your numbering plan, dial 8868 to erase the
existing plan.
§ Enter a new numbering plan through the programs 886, 8860, and 88600.
§ Check whether the plan has been entered correctly by calling the extensions
and accessing the features.
§ Transfer the Access Table to the non-volatile memory through the program
8866.
§ Keep the Access Table form; it will be necessary in the future, when you would
like to make modifications.
Entering a New Numbering Plan (While there is already another
plan):
§ Fill in an Access Table form a new.
§ If the numbering plan to be entered coincides with the current plan too much,
then clear the extension access codes through 8868 or load the default values
to the table through 8869.
§
Enter the new numbering plan through the programs 886, 8860 and 88600. In
case there are coincidences, clear the coinciding access codes temporarily
through the code 886 A*, 8860 P* or 88600 B*.
§ Check whether the plan has been entered correctly by calling the extensions
and accessing the features.
§ Transfer the Access Table to the non-volatile memory through the program
8866.
§ Keep the Access Table form; it will be necessary in the future, when you would
like to make modifications.