Karel MS48IP страница 78 Скачать руководство пользователя | Manualshive

Страница: 78 / 96

background image

MS48IP Programming Guide

70

Extension Access Code:

This program changes the extension numbers.

8 8 6 A E

Parameters

A

:

The access code of the extension, or

110 (in order to change access code of doorphone), or

161 (i order to change relay activation code)

E

:

The new access code. (minimum 1, maximum 4 digits)

Notes

1. A new access code can be entered for any extension or a line through this

program. If the entered access code is of 4 digits, then dial tone or the invalid
operation  tone  is  received  after  entering  the  last  digit.  If  dial  tone  is  received,
then the entered code does not coincide with any other code and the operation
has  been  accomplished.  On  the  other  hand,  if  the  invalid  operation  tone  is
received,  then  that  means  the  code  coincides  with  other  codes,  thus  the
operation has not been accomplished.

2. If the entered access code is of less than 4 digits, then the operation should be

terminated  with  “*”  key.  (If  the  operation  is  attempted  to  be  terminated  by
hanging up, then it cannot be accomplished.) In that case, either dial tone or the
invalid  operation  tone  is  received.  For  the  invalid  operation  case,  either  the
coincided  code  must  be  replaced  by  another,  or  must  be  temporarily  deleted.
Clearing  access  codes  facilitates  the  entry  of  a  numbering  plan  with  many
coincidences with the previous codes. (see Clearing Access Codes)

3. The access code of the line with number A is cleared after entering 886 A * and

receiving dial tone, respectively. That line can no longer be accessed, when
another extension is called or external call is made through that line, nothing is
transmitted as the access code of the line. Clearing access code can be applied
as a temporary action in case there is code coincidence.

For  example,  suppose  you  would  like  to  change  the  access  code  of  an
extension from 112 to 144, and at the same, you  would like to change  access
code  of  another  extension  from  144  to  112.  Both  of  the  actions  886  112  144*
and 886 144 112 *  will result  with error. In that case, the programs 886 144 *,
886 112 144 * and 886 144 112 *, respectively, should be entered.

4. If the Karel Feature Phone is utilized for programming, then the coinciding

number will be displayed, in case of a coincidence.

5. With this program the doorphone access code and the door-opener access

codes can be changed also.

«
...
76
77
78
79
80
...
»

Содержание MS48IP

































































































Отзывы:

Нет отзывов

Похожие инструкции для MS48IP

Бренд: ATCOM Страницы: 35

Бренд: OpenVox Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды