Karel MS48IP, Руководство по программированию

Страница: 44 / 96

MS48IP Programming Guide
36
Line Access Groups:
Extensions are assigned to line access groups through the Extension Line Access
Group program. On the other hand, lines are assigned to the access groups
through the Line Access Groups program. Therefore, extensions can access the
lines, which are in the same access group with them.
8 0 2 D G ( G G … ) *
Parameters
D : The line access code
G : 00 …14 Line access group number
: 15 No line access
Default Value
G = 00 for all lines.
Notes
1. G=00,…,14
Following each line access group number entry, the system allows other access
group number entries, instead of emitting internal dial tone. Hence, upon
entering that program once, it is possible to assign one line to 15 access groups
in a single programming session. If line D is to be assigned to less than 15
access groups, then the telephone should be hung up after the last access
group number entry.
2. If 15 is assigned to G, then the system emits internal dial tone and does not
allow access group number entries.
3. There are examples below that would clarify the topic:
Examples:
- Line 03 inaccessible,
- Line 02 can be accessed by the groups 01, 02 and 03.
- Line 01 and 04 can be accessed by group 02.
The program codes to be entered:
802 03 15 *
802 02 01 02 03 *
802 01 02 *
802 04 02*