Karel MS224, Инструкция по установке и обслуживанию

Страница: 71 / 81

Karel MS224 Installation & Maintenance Guide
Edition 3.2
68
Additional EVM-FE (Auto Attendant Expansion) and EVM-DE (Voice Mail
Expansion) cards – if there exist any - must be installed on the EVM224 card
through 36-pin F1/F2 and 24-pin D1/D2/D3 connectors, respectively. The first
EVM-FE card must be installed to the Flash socket marked as F1, whereas the
second EVM-FE card must be installed to the socket marked as F2. The first
EVM-DE card must be installed on the DRAM socket marked as D1 and the
second EVM-DE card must be installed to the socket marked as D2, whereas
the third EVM-DE card must be installed to the socked marked as D3. See the
following figure for the location of these sockets.
Figure B-22
III.7. LOCAL PAGER
•
I
NSTALLATION
:
The PG100 Local Pager is designed to be mounted on the wall. Hence, PG100
comes with a template and 2 anchor plugs with screws.
To install PG100 :
1) Place the template on the wall.
2) Drill 2 holes at the points on the template.
3) Drive the anchor plugs into the holes.
4) Insert the screws into the anchor plugs.
5) Hang the pager on the screws.