Kärcher SV 7, Руководство по эксплуатации

Страница: 28 / 412

– 14
 Remove all components and rinse them
under running water.
Replace filter in case of damage.
Please contact the authorised customer
service in order to purchase a new filter.
ATTENTION
Material damage due to incorrect
installation of the pipe bend in the
filter with the micro-perforation.

Upon installation insure that
the arrow on the pipe bend
matches the marking on the fil-
ter with the micro-perforation.
Illustration
 Reinsert the water filter insert into the
water filter container.
Illustration
 Insert the water filter container into the
appliance using the handle.
Illustration
 Move the handle to its original position
until it locks in place.
Illustration
 Evenly roll up the power cable and
place it in the power cable compart-
ment.
Illustration
 Put the water filter container back in its
position and ensure that it is properly
placed.
 Please read the cleaning instructions of
the manufacturer before treating leather,
special fabrics and wooden surfaces and
always do a trial on a sample or some hid-
den part. Let the steam-treated surface
dry and then check whether there are any
changes to the colour or form on account
as reaction to the steam.
 We recommend that you be very careful
while cleaning wooden surfaces (furni-
ture, doors, etc.) because long expo-
sure to steam can damage the wax
coating, the finish or the surface col-
ours.
Hence we recommend that you use
steam only for short intervals or first
clean the surface with a cloth that has
been steam-moistened.
 For highly sensitive surfaces (for e.g.
synthetic materials, painted surfaces,
etc.) we recommend that you use the
steam function at the minimum perfor-
mance level.
 Cleaning of stainless steel: Avoid the
use of abrasive brushes. Use hand noz-
zle with rubber lip or detail nozzle with-
out a round brush.
 Always test the compatibility of the fab-
rics on a hidden spot prior to treating
them with the appliance: Steam first,
then allow to dry before checking for
colour changes or deformation.
ATTENTION
Material damage if the setting of
the steam level is too high.

Sensitive floors, such as par-
quet floors may only be
cleaned with the highest suc-
tion performance and mini-
mum steam level.
 Cleaning of large surfaces, floors made
of ceramics, marble, parquet, carpets,
etc.
 Floor nozzle with brush strip insert: For
etching and scrubbing down stubborn
soiling.
 Floor nozzle with rubber lip insert: For
vacuuming up liquids from smooth sur-
faces.
 Floor nozzle with hard rubber insert:
Cleaning and refreshing of carpeting.
How to Use the Accessories
Refreshing textiles
Floor nozzle
Application examples
28 EN