V-038 Easy Guide
Please read these instructions carefully before using the Vax Detailer.
For advice or assistance, call
Vax Care
on
0870 606 1248
www.vax.co.uk
handheld vacuum for small spaces
PRODUCT FEATURES
a
On/off button
b
Filter inside dust container
c
Dust container
d
Charging indicator
e
Charging base
f
Brush attachment
g
Charger inlet
h
Charger
a
b
c
d
e
f
g
h
CHARGING
1. Remove the cleaner from the charging base.
2. Press the power button and hold down to vacuum dry dust and debris. Release to
shut cleaner off.
1. Grasp the dust container and remove by gently pulling away from the main body.
2. Pull the filter out and empty contents into a waste bin. Remove any extra debris
from the filter and then replace in the dust container.
3. To replace the filter, line up the 3 notches in the filter with the 3 tabs on the dust
container. Firmly press the filter into the dust container and check the alignment of
the filter. NOTE: Dust may escape through the vents if the filter is mis-aligned.
4. Re-attach the dust container.
1. Slide the brush attachment into the vacuum nozzle as needed. Remove when finished.
2. Store on charging base when not in use.
The Vax Detailer is designed to sit in the charging base on a flat surface or mounted
vertically on a wall.
HOW TO OPERATE
DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT
ATTACHMENT USAGE
CHARGING BASE/INSTALLATION
NOTE: Only use the C-038 charger supplied by Vax.
CHARGE FOR 24 HOURS BEFORE FIRST USE.
1. Connect charger unit to mains socket outlet.
2. Plug the charger into the charger inlet on the charging base, ensuring that the
dust
container nozzle interlocks with the tab nearest the charging indicator. Push the
handle down until it clicks securely into place. The charging indicator will light when
the unit is charging.
DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT
DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT
DUST CONTAINER AND FILTER: REMOVAL AND REPLACEMENT
