Kärcher RCF 3, Руководство пользователя

Страница: 18 / 280

18 English
9
Ultrasound sensor for carpet detection
10
Steering roller
11
Wheel
12
Fall sensor
13
Cleaning roller
14
Wall tracking sensor
15
Infrared receiver for locating the charging station
16
On/Off/Pause button
17
LED display indicator "Battery”
18
LED display indicator "Max”
Emptying the waste water tank
19
LED display indicator "WLAN”
20
Home button
21
LED display indicator "Fresh water”
Filling the fresh water tank
22
LED display indicator "Robot status”
23
Scraper unit with hair comb
24
Cleaning tool
25
Fresh water tank
26
Waste water tank
27
Opening lever of waste water tank
28
Mains cable
29
Detergent (30 ml)
Function of the cleaning robot
● The mobile cleaning robot draws its energy from a
built-in rechargeable battery, which it regularly re-
charges at the charging station provided. With one
battery charge, the cleaning robot can clean up to
125 minutes in sensitive mode. It automatically re-
turns to the charging station to recharge when the
battery charge is too low.
● As soon as the charging process is finished, the
cleaning robot automatically leaves the charging
station and continues the cleaning work. The clean-
ing robot also returns to the charging station when it
has finished cleaning.
● The cleaning robot moves systematically. It scans
the room with a laser sensor (LiDAR) and then
cleans the room step-by-step. It avoids obstacles
that are at least as high as the LiDAR tower.
● The cleaning robot has fall sensors that can detect
staircases and steps, designed to prevent it from
falling.
● The ultrasound sensor detects carpets and avoids
them during wet cleaning.
● The cleaning robot has a fresh and a waste water
tank as well as a microfibre roller that is regularly
moistened with fresh water and continuously cleans
itself through its rotation, thereby thoroughly wet
mopping the floor. At the same time, light loose dirt
such as crumbs, dust fluff etc. can be picked up
along with the mopping process. Dirty water is con-
veyed into the waste water tank via the roller. Parti-
cles are collected in the scraper unit with hair comb
and partially transported into the waste water tank.
LED symbols on the display
Symbol LED Meaning
WLAN pulses blue The device is connected to WLAN.
The WLAN is reset.
flashes red The robot is offline.
lights up blue The robot is connected to WLAN.
off The device is switched off.
The device is in sleep mode.
The device is in "Do not disturb" mode.
The device is no longer connected to
WLAN.
Battery lights up green LED lights up when the battery is fully
charged and up to a remaining battery
run time of 30%.
lights yellow LED lights up starting at a remaining
battery run time of 29% to 10%
flashes red LED flashes starting at a remaining
battery run time of 9%
flashes green The device is charging.
off The device is switched off.
The device is in sleep mode.
The device is in "Do not disturb" mode.
Cable fasteners
30