This Manual is the exclusive property of the Manufacturer. Reproduction, in any form whatsoever, even partially, is prohibited.
Instruction Manual
High pressure piston pumps – Series NMT-EBCW, NMT-EBCH, XLTI-EBCH, XLTI-ESA
Rev. 0
Page 5 of 25
1.4
Warranty
Hawk products are warranted by LEUCO S.p.A. to be free of defects in materials and workmanship for a period of one (1) year starting
from the date of their release from the factory.
This warranty is limited to the repair and replacement of parts and products which, at the sole discretion of LEUCO S.p.A., are deemed
defective as of the time of delivery. All products under this limited warranty shall be returned, freight prepaid, for inspection, repair or
replacement by the manufacturer.
The limited warranty hereto is valid in place of any other warranty, whether express or implicit, including all warranties of
merchantability or suitability for special purposes. These warranties are hereby rejected and excluded by the manufacturer.
Repairs or replacements of defective products shall be carried out in exclusive and sole compliance with the procedures described
herein, and LEUCO S.p.A. shall not be liable for any further loss, damage or charge, including accidental and indirect damage, that may
be caused directly or indirectly by the sales or use of these products.
Unauthorised use of spare parts that are not originally manufactured by LEUCO S.p.A. shall automatically void the warranty, which is
governed by the instructions for installation and operation specified herein. No other warranty exists extending beyond the description
above.
All pumps supplied by LEUCO have been carefully checked during production and subjected to testing
cycles before shipment. To achieve the best performance levels, avoid unpleasant inconveniences, and
keep the warranty conditions valid, the procedures described in this manual concerning correct installation
and priming of the pump must strictly be adhered to.
LEUCO S.p.A. declines any and all responsibility for errors in the drafting of this manual.
Changes to the product, or parts thereof, that have not been agreed with the Manufacturer shall relieve
them from any and all responsibility and shall also cause the warranty to become null and void.
2
PUMP DESCRIPTION
Hawk high pressure piston pumps are volumetric pumps.
As may be inferred from the header in this document, 4 pump series are described below, which are slightly different from one another.
PUMPS NMT-EBCW
This series consists of a brass head called
ECOBRASS,
plated with a chrome layer.
The piston seals are made of rubber fabric, while the other seals are made of NBR.
The admitted work fluids are summarized in the table below
PUMPS NMT-EBCH, XLTI-EBCH
This pump consists of a brass head called ECOBRASS
the piston seals are made of TEFLON (PTFE), while the other seals are made of FKM (Viton).
The admitted work fluids are summarized in the table below.
PUMP XLTI-ESA
This pump consists of an AISI 316 stainless steel head.
The piston seals are made of TEFLON (PTFE), while the other seals are made of HNBR.
The admitted work fluids are summarized in the table below.
TABLE SHOWING THE ADMITTED WORKFLOWS
PUMP
ADMITTED FLUIDS
NMT-EBCW
WATER
DEMINERALISED/DESALTED WATER
WATER WITH ALKALINE OR ACID DETERGENTS IN 0 TO 2% CONCENTRATION
