This Manual is the exclusive property of the Manufacturer. Reproduction, in any form whatsoever, even partially, is prohibited.
Instruction Manual
High pressure piston pumps – Series NMT-EBCW, NMT-EBCH, XLTI-EBCH, XLTI-ESA
Rev. 0
Page 25 of 25
The bearing life is short.
Problems are experienced in the pump-
motor coupling.
Check the status of the keys, flexible coupling or
the pulley.
The oil was not changed regularly.
Change the oil following the instructions on the
pump maintenance manual.
The pressure of the pumped water is very
high.
Check the pressure.
8
DISASSEMBLY AND DISPOSAL
If the pump is removed from the machine to be installed elsewhere or for disposal, the Manufacturer
must be contacted directly for the necessary instructions and information.
The pump must be scrapped by skilled personnel in compliance with the laws existing on safety at work.
The disassembled components must be separated based on the type of constituting materials. Polluting materials such as the
seals and lubricants must not be dumped in the environment.
Non-ferrous parts, in particular, must be delivered to an authorised disposal company, while ferrous parts can be resold for
reuse.
The Manufacturer must be notified about the pump being put out of service or transferred.
Packaging materials are recyclable. Do not dispose of the packaging together with household waste: deliver it to a recycling company.
The pump contains valuable recyclable materials which should be recycled in order to be reused.
The oil must not be dumped in the environment.
Dispose of the used pump at suitable waste collection centres.
9
SPARE PARTS
Replace parts using genuine spare parts only.
