manualshive.com logo in svg

Kärcher Landa VLP Series, Руководство оператора

Поделиться
Скачать
Kärcher Landa VLP Series Скачать руководство пользователя страница 7

7

Safety

10.  To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation. 

WARNING: Grip cleaning wand 
securely with both hands before 
starting. Failure to do this could 
result in injury from a whipping wand.

11. Never make adjustments on 

machine while in operation.

12. Be certain all quick coupler 

fittings are secured before using 
pressure washer

WARNING: High pressure 
developed by these machines will 
cause personal injury or 
equipment damage. Keep clear of 
nozzle. Use caution when oper-
ating. Do not direct discharge 
stream at people or animals, or 
severe injury or death will result. 

WARNING: Protect machine 
from freezing.

13. To keep machine in best 

operating conditions, it is 
important you protect machine 
from freezing. Failure to 
protect machine from freezing 
could cause malfunction of the 
machine and result in death, 
serious bodily injury, and/or 

property damage. Follow storage instructions 
specified in this manual.

DANGER: Risk of asphyxiation. 
Use this product only in a well 
ventilated area. 

14. Avoid installing machines in 

small areas or near exhaust 
fans. Adequate oxygen is 
needed for combustion or 
dangerous carbon monoxide 
will result.

15. Manufacturer will not be liable for any changes 

made to our standard machines or any compo-
nents not purchased from us.

16. The best insurance against an accident is precau-

tion and knowledge of the machine.

WARNING: Be extremely careful 
when using a ladder, scaffolding 
or any other relatively unstable 
location. The cleaning area 
should have adequate slopes 

17. Do not overreach or stand on 

unstable support. Keep good 
footing and balance at all times.

18. Do not operate this machine 

when fatigued or under the 

influence of alcohol, prescription medications, or 
drugs.

19. Follow the maintenance instructions specified in 

the manual.

WARNING: Use vapor fuel only.

20. The LP models are designed to run on vapor 

propane fuel. Do not use liquid fuel. Have a 
qualified serviceman install and service your equip-
ment.

21. Never expose a spark or flame where there may be 

unburned gas present.

22. Install this machine about 2 feet from wall to 

provide adequate ventilation and servicing space. 
This equipment incorporates parts such as snap 
switches or similar parts that tend to produce arcs 
or sparks. Therefore, when located in a garage, it 
should be in a room or enclosure provided for the 
purpose or should be installed 18" (457mm) or 
more above the floor.

WARNING: To reduce the risk of electric shock, 
disconnect all electrical connections and shut-off 
gas valve before servicing.

23. Install this machine on non combustible flooring.

24. Do not allow acids, caustic or abrasive fluids to 

pass through the pump.

25. Never run pump dry or leave spray gun closed 

longer than 3 minutes.

Landa VNG Operator’s Manual  8.913-939.0 - AB

WARNING

TRIGGER GUN KICKS 

 BACK —  HOLD WITH 

        BOTH HANDS

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

PROCTECT FROM

FREEZING

WARNING

RISK OF INJURY

FROM FALLS WHEN

USING LADDER.

DANGER

RISK OF 

ASPHYXIATION. 

USE THIS PRODUCT 

ONLY IN A WELL 

VENTILATED AREA.

Содержание Landa VLP Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды