manualshive.com logo in svg

Kärcher Landa VLP Series, Руководство оператора

Поделиться
Скачать
Kärcher Landa VLP Series Скачать руководство пользователя страница 15

15

Operations

Start Up

WARNING: Read and follow 
instructions carefully when 
installing or servicing machine. 
Failure to do so may result in 
damage to property or personal 
injury.

1.

Installation or servicing of gas 
appliances and controls must 
only be performed by qualified 
personnel. After installation or 

servicing, test the manual valve, operating valves, 
pressure regulation, and automatic shut-off valve 
for proper operation.

2.

Install in a suitable dry location. Machine must be 
located in an area properly protected from weather.

3.

Shut off gas and electricity before starting installa-
tion or service. Turn back on to test or operate.

4.

DO NOT

 connect machine before pressure testing 

the gas piping. Damage to gas valve may result. 
(9" - 14" W.C.P. or 1/2 PSIG)

5.

DO NOT

 insert any object other than suitable pipe 

or tubing in the inlet or outlet of the gas valve. 
Internal damage may occur and result in a 
hazardous condition.

6.

DO NOT

 short the gas valve terminals.

7.

DO NOT

 grip gas valve body with a pipe wrench or 

vise.  Damage may result causing gas leakage. 
Use inlet or outlet bosses or a special body wrench.

8.

DO NOT

 allow any flame to impinge on the 

regulator vent tubing if supplied. It may clog and 
cause gas valve malfunction.

9.

DO NOT

 use the gas cock to adjust gas flow.

10. If main burner fails to shut off, turn off gas supply.

11. Keep all combustible materials away from gas 

appliances. 

DO NOT

 allow lint or dust to collect in 

burner area.

12. Dials must only be operated by hand. Never use 

pliers, wrenches or other tools to turn dials.

13. Leak test with a soap solution after installation or 

service with the main burner on. Coat pipe and 
tubing joints, gaskets, etc.

For Your Safety Read Before Lighting

WARNING

If you do not follow these instructions exactly, a fire or 
explosion may result, causing property damage, 
personal injury or loss of life.

A. This appliance has a pilot which must be lighted by 
hand. When lighting the pilot, follow these instructions 
exactly.

B. BEFORE LIGHTING smell all around the appliance 
area for gas. Be sure to smell next to the floor because 
some gas is heavier than air and will settle on the floor.

"FOR YOUR SAFETY

"WHAT TO DO IF YOU SMELL GAS"

•   Do not try to light any appliance.

•   Do not touch any electrical switch, do not use 

any phone in your building.

•   Immediately call your gas supplier from a 

neighbor's phone. Follow the gas supplier's 
instructions.

•   If you cannot reach your supplier, call the fire 

dept.

C. Use only your hand to push in or turn the gas 
control knob. Never use tools. If the knob will not push 
in or turn by hand, don't try to repair it; call a qualified 
service technician. Forced or attempted repair may 
result in a fire or explosion. 

D. Do not use this appliance if any part has been under  
water. Immediately call a qualified service technician 
to inspect the appliance and to replace any part of the 
control system and any gas control which has been 
under water.

Landa VNG Operator’s Manual  8.913-939.0 - AB

WARNING

    READ OPERATOR’S 

 MANUAL THOROUGHLY 

           PRIOR TO USE.

OPERATIONS

SAFET

Y

MAINTENANCE

Содержание Landa VLP Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды