manualshive.com logo in svg

Kärcher Landa VLP Series, Руководство оператора

Поделиться
Скачать
Kärcher Landa VLP Series Скачать руководство пользователя страница 18

18

Operations

Operating Instructions

STEP 1:

 Have an electrician 

connect power supply into elec-
trical box according to information 
shown on the serial plate.

STEP 4:

 To apply detergent open 

the detergent valve counterclock-
wise making sure that the 
detergent pick-up tube is in the 
detergent solution and not sucking 
air. With optional remotes, the 
detergent switch needs to be 
turned to the OFF position before 
turning to the ON position to 
activate the detergent solenoid.

STEP 2:

 Turn on main gas supply 

and depress and turn control knob 
to the ‘ON’ position. 

STEP 5:

 

To Stop:

 Turn the burner 

switch off and place the detergent 
pick-up tube into fresh water. Open 
the detergent valve and trigger 
spray gun allowing detergent lines 
to be flushed and the burner to 
cool. Otherwise, coil damage will 
result. After water has cooled, turn 
pump switch to OFF position. If the 
machine is going to be off for an 
extended period of time, put the 
manual valve on the gas valve into 
the OFF position.

STEP 3:

 Push pump ‘ON’ switch, or 

turn to pump position and pull the 
trigger on the spray gun allowing 
cold water to flow. To activate the 
gas control valve for hot water, 
push the burner switch to the ‘ON’ 
position and pull the trigger on the 
spray gun.When steam is needed, 
turn the steam knob counterclock-
wise. Then turn the temperature 
adjustment knob to 275°F.

STEP 6:

 Close the steam knob and 

detergent valve by turning 
clockwise and settling the tempera-
ture control knob between 200°- 
225°F.

NOTE: Do not allow acids, 
caustic or abrasive fluids to pass 
through the pump.

NOTE: Never run pump dry or 
leave spray gun closed longer 
than 3 minutes.

Detergent
Valve

Burner Switch

Pump Switch

Burner Switch

Pump Switch

Steam Valve

Detergent Valve

Landa VNG Operator’s Manual  8.913-939.0 - AB

OFF

ON

NOTE:  Selection of high or low pressure is 
accompanied by turning the handle. High 
pressure nozzle must be inserted at end of wand 
to obtain hight pressure. To apply soap read 
operator’s manual.

Variable Pressure 

Control Handle

Trigger

Variable Pressure 

Wand (VP)

High 

Pressure 

Nozzle

Brass Soap 

Nozzle

Содержание Landa VLP Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды