Kärcher KSM 750 BAT, Руководство по эксплуатации

Страница: 8 / 18

English KSM 750 BAT/PROFI/USA 19
Maintenance by the customer
Daily maintenance
Check roller and side brush for
wear and trapped straps
Check function of all controls and
indicator lamps
Maintenance every 50 operating
hours
Check voltage, wear, and function
of the drive belt
Check freedom of movement of
Bowden cables and moving parts
Check setting and wear of sealing
strips in sweeping area
Check sweeping pattern of the
main brush
Clean flat pleated filter
Measure battery voltage
Note:
All service and maintenance work, for
maintenance undertaken by the
customer, must be carried out by
qualified technical personnel.
A KÄRCHER specialist dealer can be
consulted at any time if required.
Maintenance by the customer
service organisation
Maintenance after 20 operating
hours
♦
First inspection
Maintenance every 100 operating
hours
Maintenance every 300 operating
hours
Maintenance every 500 hours
Note:
To ensure the guarantee, all service
and maintenance work must be
carried out by authorised KÄRCHER
customer service during the
guarantee period..
MAINTENANCE TASKS
Safety instructions
Preparations
Park the sweep suction machine on
a level surface
Remove the master switch key
Lock the hand brake
Installing the pushing handle
Loosen star grip nuts and push
screws outwards
Set the push handle upright
Tighten star grip nuts
Note:
Ensure that the square bolt barrel
engages.
Open/close the unit‘s cover
Open unit cover
Insert the master switch key and
turn it 180°
Close unit cover
Raise the lock of the unit cover.
Close unit cover.
Lock the unit‘s cover with the
master switch key.
Note:
The unit cover is lockable and can be
opened and locked only with the
master switch key.
Safety instructions for the battery
♦
Observe the operating instructions
♦
Work on batteries is permitted only
after instruction by trained
personnel
♦
Observe the safety instructions of
the battery manufacturer.
♦
Only when you use batteries and
battery chargers prescribed by
Kärcher is the guarantee valid.
♦
Wear safety goggles and protective
clothing
♦
Observe the instructions for the
prevention of accidents as well as
DIN VDE 0510, VDE 0105 T.1
Risk of fire and explosion!
♦
Smoking prohibited
♦
No naked flames, glowing embers
or sparks in the vicinity of batteries
Corrosive burn hazard with wet
batteries!
♦
Rinse out or rinse off splashes of
acid in the eye or on the skin with
copious quantities of clean water
♦
Then consult a doctor immediately
♦
Wash contaminated clothing with
water
Risk of explosion and fire!
♦
Do not place any objects or tools
on the battery because voltage is
always present between the battery
poles
♦
Areas in which batteries are
charged must be well ventilated, as
highly explosive gas forms during
charging
♦
Old batteries with this symbol are
reusable commodities and must
therefore be returned for recycling
♦
Old batteries which are not
returned for recycling must be
disposed of as special waste,
thereby observing all statutory
regulations
Mounting the battery
(KSM 750 BAT)
Loosen battery holder
Place the battery on the engine
bracket
Screw on battery holder
Note:
When using batteries with a liquid
electrolyte coat the battery terminals
adequately with terminal grease to
protect them from corrosion!