Kärcher KSM 750 BAT, Руководство по эксплуатации

Страница: 12 / 18

English KSM 750 BAT/PROFI/USA 23
Slide a support under it with
1 2 mm thickness to adjust the
ground clearance
Align the sealing strip
Tighten the fastenings of the
sealing strip
Replacing the dust filter
♦
Wear a dust protection mask when
working on the filter system
♦
Observe the safety precautions for
handling fine dust
Lock the hand brake
Remove the swept material
container
Remove safety cotter pin of the
shaker rod
Pull out rod.
Loosen fastening screws.
Loosen fastening screws.
Remove sheet steel chassis
Replace the dust filter
Note:
Make sure that the vanes remain
undamaged when mounting the new
filter
ACCESSORIES
Side brush 6.951-073
Provided with standard bristles for
indoor and outdoor surfaces.
Soft side broom 6.906-161
For fine dust on indoor surfaces,
resistant to moisture.
Standard main brush 6.905-587
Wearproof and wetproof.
Universal bristles for indoor and
outdoor cleaning.
Main brush soft 6.905-870
With natural bristles specially for
sweeping fine dust on smooth indoor
floors. Not wetproof, not for abrasive
surfaces.
Main brush hard 6.905-868
For removing stubborn external dirt,
damp-proof.
Fluff filter add-on kit
for sweeping carpets 2.638-851
Prevents clogging of the flat pleated
filter.
Flat pleated filter 5.731-585
Replace flat fold filters at least once a
year.
Wetproof, washable. Filter efficiency
> 99,9 %, corresponds to category C
of ZH 1/487 of BIA.
FAULT INDICATIONS
Machine will not start
Charge the battery
Check overload fuse
Notify KÄRCHER-Customer
Service
Motor running but machine not
moving
Set the Bowden cable to the driving
operation mode
Notify KÄRCHER-Customer
Service
Machine remains stationary on
inclines
Select flatter route
Check overload fuse
Notify KÄRCHER-Customer
Service
Machine not sweeping properly
Check the main brush and the side
brushes
Make the coarse dirt flap movable
Slacken the bowden cable of the
coarse-dirt flap (adjusting screw)
Check the tension and the function
of the belt, replace it, if necessary
Re-adjust main brush
Replace the sweep roller
Notify KÄRCHER-Customer
Service
Machine making dust
Make the coarse dirt flap movable
Slacken the bowden cable of the
coarse-dirt flap (adjusting screw)
De-dust or replace the dust filter
Empty debris container
Replace sealing profile on debris
container
Adjust or replace the sealing strip
Poor sweeping around the edges
Readjust lowering of the side brush
Replacing the side broom
Notify KÄRCHER-Customer
Service
Raising the side brush does not
function
Check the Bowden cable of the
raising mechanism
Notify KÄRCHER-Customer
Service
TECHNICAL DATA
KSM 750 BAT
Unit data
Length x width x height
1240 x 690 x 1150 mm
Weight (without battery) 62 kg
Total weight 85 kg
Travel- and
sweeping speed 4 km/h
Climbing ability max. 15 %
Main brush diameter 265 mm
Side brush diameter 390 mm
Surface performance 2800 m²/h
Working width without
side brush 550 mm
Working width with
side brush 710 mm
Volume of the swept
material container 40 Litres
Protection class drip-proof
IPX 3
Engine
Type permanent magnet
D.C. motor
Turning direction, right
Voltage 12 V
Rated current 34 A
Rated power 300 W
r.p.m. 2700 2800 1/min
Design MP80S/3B14
Type of protection IP 20
Battery
Type PzS 1 x 12 V
Capacity 60 Ah (5h)
Weight 23 kg
Charging time for
completely
discharged battery 14 - 16 h
Duration of operation after
several charges approx. 1,5 h
Electric fuse protection
Central 50 A
Control 3 A